Reveal Fit
Note: Please do not take any deductions, the factory will make them for you.
Reveal Fit
The blind will sit and be installed within the reveal.
Measure the Width
Measure the exact width of the reveal in three places and give the smallest measurement. We will make a blind that will fit to the measurement.
Measure the Height
Measure the exact height of the inside of the window frame (reveal). Take three different measurements and give the smallest measurement. This will be where the blind sits in the closed position.
Face Fit
Note: Please do not take any deductions, the factory will make them for you.
Face Fit
The blind will be installed on the architrave or on the outside of the window.
Measure the Width
Measure the Width of the Architrave. Take three measurements top, middle and bottom. The largest measurement will be your final measurement you enter. Note, windows where there are no architraves, add a minimum of 50mm on each side so the blind overlaps the window.
Measure the Height
Measure the exact height of the window. Start from the very top of window frame(architrave) to the bottom of the frame(architrave). You need to take three different measurements and use the largest measurement. This is where the blind will finish in the closed position. Note, windows where there are no architraves, add a minimum of 100mm on the drop to minimise any gaps.